IMPORTANT MANUAL
DO NOT THROW AWAY
5
000
REPAIR PARTS MANUAL
WARNING:
Read this Manual and follow all Warnings
and Safety Instructions. Failure to do so can
result in serious injury.
MODEL:
PXT175G42
LAWN TRACTOR
ALWAYS WEAR EYE PROTECTION DURING OPERATION
Visit our website: www.poulan.com
532 44 10-87
HOW TO USE THIS MANUAL
This manual is designed to provide the customer with a means to identify the parts on his/her tractor
when ordering repair parts. The illustrations may or may not represent the actual assemblies; therefore,
it is not recommended to use this manual as a guide to assemble or disassemble the tractor. Some
hardware and parts are drawn larger in order to more readily identify them.
Each tractor has its own model number.
The model number for your tractor can be found on the fender under the seat.
When ordering parts, always give the following information:
•
•
•
•
Product - “Tractor”
Model Number - “PXT175G42 (96016002600)
Part Number
”
Part DESCRIPTION
TABLE OF CONTENTS
SCHEMATIC ................................................................................................................3
ELECTRICAL............................................................................................................4-5
CHASSIS ..................................................................................................................6-7
DRIVE........................................................................................................................8-9
ENGINE.................................................................................................................10-11
STEERING ............................................................................................................12-13
DECALS.....................................................................................................................14
SEAT..........................................................................................................................15
MOWER DECK .....................................................................................................16-17
MOWER LIFT.............................................................................................................18
WARRANTY..............................................................................................BACK PAGE
2
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
SCHEMATIC
SCH03
BATTERY
SOLENOID
STARTER
M
RED
RED
RED
A
AMMETER
OPTIONAL)
FUSE
(
S
B
M
G
A1
A2
WHITE
L
CLUTCH / BRAKE
ATTACHMENT CLUTCH
(CLUTCH OFF)
(
PEDAL UP)
BLACK
BLACK
SEAT SWITCH
NOT OCCUPIED)
(
BLACK
BLACK
GRAY
GRAY
REVERSE SWITCH
NOT IN REVERSE
SHORTING CONNECTOR
BLACK
BLACK
SPARK PLUGS
GAP
BLACK/WHITE
IGNITION
UNIT
(2 PLUGS
ON TWIN CYL. ENGINES)
BLUE
HOUR
METER
BLACK
(OPTIONAL)
FUEL
LINE
BLUE
CHARGING SYSTEM OUTPUT
AMP DC @ 3600 RPM
28 VOLTS AC MIN. @ 3600 RPM
(CHARGING SYSTEM DISCONNECTED)
3
FUEL SHUT-OFF
SOLENOID
RED
LIGHTING SYSTEM OUTPUT
5
AMP AC @ 3600 RPM
STATOR
DIODE
ORANGE
LIGHT SWITCH
1
4 VOLTS AC MIN. @ 3600 RPM (LIGHTS OFF)
BLACK
BROWN
HEADLIGHTS
NOTE
YOUR TRACTOR IS
EQUIPPED WITH A SPECIAL
ALTERNATOR SYSTEM.
THE LIGHTS ARE NOT
CONNECTED TO THE
3
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
ELECTRICAL
L02
22
79
21
33
34
30
90
24
27
41
43
42
26
2
40
25
28
16
16
94
29
92
93
4
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
ELECTRICAL
KEY PART
NO. NO.
DESCRIPTION
1
2
8
1
2
2
2
2
2
2
2
2
3
3
3
4
4
4
4
7
9
9
9
9
532 16 34-65 Battery 12 Volt 25 Amp
874 76 04-12 Bolt Hex Hd 1/4-20 Unc x 3/4
532 17 66-89 Battery Box
532 17 61-38 Switch Interlock Push-In
532 17 56-88 Harness Asm. Light
532 00 41-52 Bulb Light
532 42 12-99 Cable Battery 6 Ga. 11"red
532 42 12-97 Cable Battery
532 17 51-58 Fuse
6
1
2
4
5
6
7
8
9
0
3
4
0
1
2
3
9
0
2
3
4
873 51 04-00 Nut Keps Hex 1/4-20 unc
532 42 12-98 Cable Ground 6 Ga. 12"black
532 19 27-49 Switch Seat
532 19 33-50 Switch Ign
532 41 19-35 Key/Chain
532 11 07-12 Switch Light
532 19 74-28 Harness Ign
871 11 04-08 Bolt Blk Fin Hex 1/4-20
532 13 15-63 Cover Terminal Red
532 19 25-07 Solenoid
532 17 52-42 Socket Asm Bulb
532 43 53-95 Cover Terminal Battery
532 19 66-15 Harness Pigtail
532 19 25-40 Screw Plastic 10-14 x 2.0
532 19 18-34 Module Reverse
NOTE: All component dimensions given in U. S. inches
1
inch = 25.4 mm.
5
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
CHASSIS AND ENCLOSURES
29
159
17
212
30
24
18
39
28
2
4
2
5
2
6
25
5
26
3
1
5
2
09
209
278
9
11
2
09
208
2
08
1
3
207
6
4
26
2
09
3
5
1
209
33
10
42
208
1
115
3
7
145
3
7
2
09
3
5
209
114
142
2
141
205
3
5
38
34
2
6
209
3
8
205
Chassis-stlt_Alpha_18
6
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
CHASSIS AND ENCLOSURES
KEY PART
NO. NO.
DESCRIPTION
532 17 46-19 Chassis
532 17 65-54 Drawbar
1
2
5
9
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
3
3
3
6
1
1
1
1
1
1
2
2
2
2
2
2
-
532 15 52-72 Bumper, Hood/Dash
532 43 33-53 Dash
0
1
3
7
8
4
5
6
8
9
0
1
3
4
5
7
8
9
4
872 14 06-08 Bolt, Carriage 3/8-16 x 1
532 17 49-96 Panel Dash LH
532 18 17-19 Panel Slkscr Dash RH
532 44 15-09 Hood
532 18 49-21 Bumper Hood
874 78 06-16 Bolt Fin Hex 3/8-16 unc x 1 Gr. 5
819 13 13-12 Washer 13/32 x 13/16 x 12 Ga.
873 80 06-00 Nut Lock Hex w/Ins 3/8-16 unc
532 42 67-41 Grille
532 19 54-02 Lens
532 44 22-13 Fender
532 13 66-19 Bracket Fender Repl 109873x
532 44 15-19 Footrest Pnt LH
532 44 15-18 Footrest Pnt RH
872 11 06-06 Bolt Rdhd Sht Sqnk 3/8-16 x 3/4
817 49 05-08 Screw Thdrol 5/16-18 x 1/2 TYT
532 17 57-10 Bracket Asm. Pivot Mower Rear
532 18 75-68 Bracket Pivot
532 15 47-98 Dash Lower
14 532 15 81-12 Keeper Belt LH Rear
15 817 06 06-20 Screw 3/8-16 x 1-1/4
41 873 90 06-00 Nut Lock 3/8-16
42 532 17 57-02 Plate Reinforcement
45 532 40 91-67 Rod Pivot Chassis/Hood
59 532 18 56-35 Cupholder
05 817 49 06-08 Screw Thdrol 3/8-16 x 1/2
07 817 67 05-08 Screw Thdrol 5/16-18 x 1/2
08 817 67 06-08 Screw Thdrol 3/8-16 x 1/2
09 817 00 06-12 Screw Hex Wsh Thdrol 3/8-16
12 532 18 75-69 Insert Reflective
78 532 41 63-58 Screw #10 x 0.750 BOS Thread
-
-
532 00 54-79 Plug Button Blk 359 Dia Choke
532 18 78-01 Plug Dome Plasitc (Choke Hole)
-
NOTE: All component dimensions given in U.S. inches
inch = 25.4 mm.
1
7
TRACTOR--MODELNUMBERPXT175G42(96016002600), PRODUCTNO. 9601600-26
DRIVE
5
7
1
20
89
6
3
6
4
9
1
97
1
20
8
1
7
0
1
16
6
6
8
1
98 161
59
1
58
1
6
5
1
62
5
6
6
4
2
1
55
8
5
112
1
69
83
41
14
1
3
1
1
0
4
163
168
2
02
1
12
50
1
6
8
1
13
150
8
0
4
82
1
8
65
1
66
3
8
4
8
3
51
8
5
156
5
11
1
8
2
7
151
3
9
51
1
6
79
4
9
5
2
3
3
2
0
3
47
3
0
6
2 170
5
2
6
2
35
36
120
6
3
7
7
7
3
4
2
5
2
8
24
9
3
6
35
1
6
2
2
53
145
26
10
7
7
7
4
2
7
9
6
2
9
7
8
76
22
1
2
6
7
5
drive-stlt_Peerless_fender_21
8
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
DRIVE
KEY PART
NO. NO.
KEY PART
NO. NO.
DESCRIPTION
DESCRIPTION
6
6
6
7
7
7
7
7
7
7
8
8
8
8
8
8
8
9
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
5
6
9
0
4
5
6
7
8
9
0
1
2
3
4
5
9
6
810 04 07-00 Washer Lock Hvy Hlcl Spr 7/16
532 15 47-78 Keeper Belt Engine Foolproof
532 14 24-32 Screw Hex 1/4-1/2 unc
532 13 46-83 Guide Belt Mower Drive RH
532 13 70-57 Spacer Axle
1
2
3
4
5
6
8
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
4
4
4
4
5
5
5
5
5
5
5
6
6
6
- - - - - - - - -
Transaxle Peerless 206-545C
532 14 66-82 Spring Return Brake T/a Zinc
532 12 36-66 Pulley Transaxle 18" tires
812 00 00-28 Ring Retainer # 5100-62
532 12 15-20 Strap Torque 30 Degrees
817 06 05-12 Screw 5/16-18 x 3/4
532 12 17-49 Washer 25/32 x 1 1/4 x 16 Ga.
812 00 00-01 E-ring #5133-75
532 19 27-06 Rod Shift Fender Adjust Lt
876 02 04-16 Pin Cotter 1/8 x 1 Cad
532 10 57-01 Washer Plate Shf 388 Sq Hole
874 55 04-12 Bolt 1/4-28 unf Gr. 8 W/Patch
810 04 04-00 Washer Lock Hvy Helical
873 80 05-00 Nut Lock Hex w/Ins 5/16-18
874 78 06-16 Bolt, Fin Hex 3/8-16 unc x 1 Gr. 5
873 80 06-00 Nut Lock 3/8-16 unc
532 12 35-83 Key Square 2 0 x 1845/ 1865
532 12 17-48 Washer 25/32 x 1-5/8 x 16 Ga.
532 12 50-96 Key Woodruff #9 3/16 x 3/4
532 14 50-90 Arm Shift
0
1
3
4
6
8
9
1
2
4
5
6
7
8
9
0
2
4
5
6
7
8
9
1
7
8
9
0
1
2
3
5
6
7
2
3
4
532 16 55-92 Shaft Asm Cross
532 16 57-11 Spring Torsion T/a
819 17 12-16 Washer 17/32 x 3/4 x 16 Ga.
532 16 62-31 Link Transaxle
532 10 69-33 Knob
532 15 03-60 Nut Lock Center 1/4 - 28 FNTHD
532 19 49-71 Console Shift STLT
532 13 08-04 Rod Brake Blk Zinc 26 840
873 35 06-00 Nut Hex Jam 3/8-16 unc
532 10 68-88 Spring Rod Brake 2 00 Zinc
819 13 13-16 Washer 13/32 x 13/16 x 16 Ga.
876 02 04-12 Pin Cotter 1/8 x 3/4 Cad
532 17 57-65 Rod Brake Parking LT/YT
532 07 16-73 Cap Brake Parking Black
532 16 95-92 Bracket Mtg Transaxle
874 76 05-12 Bolt Hex Hd 5/16-18 unc x 3/4
532 17 55-78 Shaft Asm Pedal Foot
532 12 01-83 Bearing Nylon Blk 629 Id
819 21 16-16 Washer 21/32 x 1 x 16 Ga.
532 12 49-63 Pin Roll 3/16 x 1"
532 12 47-88 Retainer Spring 1"
12 819 09 12-10 Washer 9/32 x 3/4 x 10 Ga.
13 532 12 72-85 Strap Torque LT
16 872 14 06-08 Bolt Rdhd Sq Neck 3/8-16 x 1.0
20 873 90 06-00 Nut Lock Flg. 3/8-16 unc
45 874 49 05-40 Bolt 5/16-18 x 2-1/2 Gr. 5
50 532 17 54-56 Spacer
51 819 13 32-10 Washer 13/32 x 2 x 10 Ga.
56 532 16 60-02 Washer Srrted 5/16 ID x 1.125
58 532 43 74-58 Bracket Shift Mount
59 532 18 39-00 Hub Shift
61 872 14 04-06 Bolt Rdhd Sqnk 1/4-20 x 3/4 Gr. 5
62 873 68 04-00 Nut Crownlock 1/4-20 unc
63 874 78 04-16 Bolt Hex Fin 1/4-20 unc x 1 Gr. 5
65 532 43 82-50 Bracket Pivot Lever
66 817 49 05-10 Screw 5/16-18 x 5/8
68 532 16 54-92 Bolt Shoulder 5/16-18 x .561
69 532 16 55-80 Plate Fastening
532 17 91-14 Pulley Idler Composite
872 11 06-22 BoltFinHex3/8-16uncx2-3/4Gr.5
532 17 55-56 Keeper Belt Idler Flat
532 12 77-83 Pulley Idler V Groove Plastic
532 15 44-07 Bellcrank Clutch Grnd Driv
532 12 32-05 Retainer Belt Style Spring
872 11 06-12 Bolt 3/8-16 x 1-1/2 Gr. 5
873 68 06-00 Nut Crownlock 3/8-16 unc
873 68 05-00 Nut Crownlock 5/16-18 unc
532 19 96-52 Link Clutch
70 532 18 74-14 Keeper, Belt T/A
97 532 16 96-13 Nyliner Snap-In
98 532 16 95-93 Washer Nyl
02 872 11 06-14 Bolt Carr. SH 3/8-16 x 1-3/4 Gr. 5
532 10 57-09 Spring Return Clutch 6 75
817 06 06-20 Screw 3/8-16 x 3/4
532 13 82-55 V-Belt Ground Drive 95 25
532 12 48-72 Cover Pedal Round
532 17 54-10 Engine Pulley
532 17 39-37 Bolt Hex
NOTE: All component dimensions given in U.S. inches
inch = 25.4 mm.
1
9
TRACTOR - - MODEL NUMBER PXT175G42 (96016002600), PRODUCT NO. 960 16 00-26
ENGINE
3
2
72
1
13
4
81
78
122
3
2
78
44
3
1
46
33
37
45
33
23
40
29
OPTIONAL EQUIPMENT
Spark Arrester
engine-stlt_bs_16
10
TRACTOR - - MODEL NUMBER PXT175G42 (96016002600), PRODUCT NO. 960 16 00-26
ENGINE
KEY PART
NO. NO.
DESCRIPTION
1
2
3
4
1
2
2
3
3
3
3
4
4
4
4
7
7
8
1
532 17 05-51 Control Throttle /Choke
817 72 04-08 Screw Hex Thd Cut 1/4-20 x 5/8 T
- - - - - - - -
Engine Briggs Model 31C707-3487-G1
532 13 73-52 Muffler Exhaust
3
3
9
1
2
3
7
0
4
5
6
2
8
1
532 16 52-91 Gasket
532 16 98-37 Shield Browning/Debris Guard
532 13 71-80 Arrestor Spark
532 40 75-45 Tank Fuel
532 43 02-20 Cap Asm Fuel
532 12 34-87 Clamp Hose Blk
532 13 70-40 Line Fuel
532 12 40-28 Bushing Snap
817 67 04-12 Screw Hexwsh Thdrol 3/8-16 x 3/4
817 00 06-12 Screw 3/8-16 x 3/4
819 09 14-16 Washer 9/32 x 7/8 x 16 Ga.
532 19 23-34 Screw Socket Hd 5/16-18 x .75
817 06 06-20 Screw 3/8-16 x 1-1/4
873 51 04-00 Nut Keps Hex 1/4-20 unc
22 532 42 19-22 Extension Drain Oil
NOTE: All component dimensions given in U.S. inches
inch = 25.4 mm
1
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive En-
gineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and
corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values
are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operat-
ing conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and
the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross
power when used in a given piece of power equipment (actual “on-site” or net power). This difference is due to a variety
of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.),
application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
11
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
STEERING
38
97
34
39
1
41
42
37
37
36
44
88
91
43
71
67
46
68
8
29
67
6
13
9
2
65
17
4
6
7
9
9
5
82
6
8
7
9
40
32
5
68
29
4
26
3
43
11
43
2
8
95
8
15
10
29
Steering-stlt_OPP_1
30
12
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
STEERING
KEY PART
NO. NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
1
1
1
1
1
2
2
2
3
3
3
3
3
3
3
4
4
4
4
4
4
6
6
6
7
8
8
9
9
9
532 18 67-80 Wheel Steering
532 41 81-68 Axle Asm
532 16 98-40 Spindle Asm LH
532 16 98-39 Spindle Asm RH
532 12 49-31 Bearing Race Thrust Harden
532 12 17-48 Washer 25/32 x 1-5/8 x 16 Ga.
819 27 20-16 Washer 27/32 x 1-1/4 x 16 Ga.
812 00 00-29 Ring Klip #t5304-75
532 12 49-37 Bearing Col Strg Blk
532 17 51-21 Link Drag
0
1
3
5
7
6
8
9
0
2
4
6
7
8
9
0
1
2
3
4
6
5
7
8
1
2
8
1
5
7
810 04 06-00 Washer Lock Hvy Hlcl Spr 3/8
532 13 65-18 Spacer earing Axle Front
873 90 06-00 Nut Lock 3/8-16 unc
532 41 13-86 Shaft Asm Strg
532 12 68-47 Bushing Link Drag Blk LR
819 13 14-16 Washer 13/32 x 7/8 x 16 Ga.
817 00 06-12 Screw 3/8-16 x 3/4
876 02 04-12 Pin Cotter 1/8 x 3/4 Cad
532 19 27-57 Rod Tie Wire Form
810 04 05-00 Washer Lock Hvy HLCL Spr. 5/16
532 15 50-99 Bushing Strg 5/8 Id Dash
532 15 29-27 Screw
532 19 29-16 Cap Wheel Steer
819 11 38-12 Washer 11/32 ID x 2-3/8OD 12 Ga.
873 54 06-00 Nut Crownlock 3/8-24
532 18 67-37 Adaptor Wheel Strg
532 16 96-33 Boot Steering
532 12 17-49 Washer 25/32 x 1 1/4 x 16 Ga.
532 19 07-52 Extension Steering
532 12 12-32 Cap Spindle Fr Top Blk
532 41 47-36 Spacer Brace Axle
872 11 06-18 Bolt RdHd Sqnk 3/8-16 x 2-1/4
532 16 98-27 Brace Axle
532 17 51-46 Steering Asm
532 19 99-78 Bracket Susp Chassis Front
532 17 51-18 Bolt shoulder 7/16-20
532 17 55-53 Clip Steering
532 18 89-67 Washer Hardened
532 42 89-82 Bolt Fin Hex 5/16-18 x 4 w/Patch
NOTE: All component dimensions given in U.S. inches
inch = 25.4 mm.
1
13
TRACTOR - - MODEL NUMBER PXT175G42 (96016002600), PRODUCT NO. 960 16 00-26
DECALS
2
9
3
9
13
15
5
4
7
6
10
1
8
KEY PART
NO. NO.
KEY PART
NO. NO.
DESCRIPTION
DESCRIPTION
1
2
3
4
5
6
7
8
9
532 43 10-92 Decal, Engine HP
532 43 88-35 Decal, Steering Wheel
532 43 88-09 Decal, Replacement
532 43 52-86 Decal, Warning
10
13
15
- -
- -
- -
- -
- -
532 43 13-75 Decal, Fender Service
532 41 16-58 Decal, Warning
532 14 50-05 Decal, Caution, Battery
532 13 83-11 Decal, Handle Lft Height Adj.
532 18 10-90 Pad Footrest RH
532 18 10-91 Pad Footrest LH
532 44 10-86 Manual Operator's Eng/French
532 44 10-87 Manual Parts
532 43 88-31 Decal, Fender
532 17 05-63 Decal, Mower Warning
532 43 88-41 Decal, Side Panel
532 16 03-96 Decal, V-Belt Sch.
532 43 88-34 Decal, Hood RH/LH
WHEELS & TIRES
KEY PART
NO. NO.
DESCRIPTION
1
1
2
3
4
5
6
7
8
9
1
1
-
532 05 91-92 Cap, Tire valve
2
5,8
532 06 51-39 Stem, Valve
4
,10
532 10 62-22 Tire, Front
532 05 99-04 Tube, Front (Service item only)
532 43 93-33 Rim assembly, Front
532 12 49-57 Fitting, Grease (Front wheel only)
532 12 49-59 Bearing, Flange (Front wheel only)
532 43 93-34 Rim assembly, Rear
532 13 84-68 Tire, Rear
7
3,9
6
1
1
0
1
-
532 12 49-26 Tube, Rear (Service item only)
532 17 50-39 Cap, Hub Axle
532 14 43-34 Sealant, Tire (10 oz. Tube)
NOTE: All component dimensions given in U.S. inches
inch = 25.4 mm
1
wheel_1
14
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
SEAT
1
8
9
8
9
1
4
7
7
1
0
5
6
22
21
2
24
5
2
6
6
1
25
1
5
23
1
7
4
1
3
3
12
seat-stlt_bolt_2
KEY PART
NO. NO.
KEY PART
NO. NO.
DESCRIPTION
DESCRIPTION
1
2
3
4
5
6
7
8
9
1
1
1
1
532 40 10-42 Seat
15
16
17
21
22
23
24
25
26
532 13 43-00 Spacer Split .28 x .96
532 12 12-50 Spring Cprsn
532 14 05-51 Bracket Seat Pivot
871 11 06-16 Bolt Hex 3/8 - 16 x 1
819 13 16-10 Washer 13/32 x 1 x 10 Ga.
532 14 50-06 Clip Push-In Hinged
873 80 06-00 Nut Lock Hex w/Ins 3/8 - 16
532 12 41-81 Spring Seat Cprsn 2 250 Blk Zi
817 00 06-16 Screw 3/8-16 x 1.5
819 13 16-14 Washer 13/32 x 1 x 14 Ga.
532 19 55-30 Pan Asm. Seat
532 12 39-76 Nut Lock 1/4 Lge Flg
532 17 18-52 Bolt Shoulder 5/16-18 unc-2A
873 80 05-00 Nut Lock Hex w/Ins 5/16 - 18
871 11 08-14 Bolt Hex
819 17 19-12 Washer 17/32 x 1-3/16 x 12 Ga.
532 12 70-18 Bolt Shoulder 5/16-18 x .62
810 04 08-00 Washer Lock
0
2
3
4
532 17 46-48 Bracket Pnt Mounting Switch
532 12 12-48 Bushing Snap Blk Nyl
872 05 04-12 Bolt Rdhd Sht Nk 1/4 - 20 x 1 -1/2
NOTE: All component dimensions given in U.S. inches
inch = 25.4 mm.
1
15
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
MOWER DECK
ꢂꢆ
ꢅꢄ
67
ꢃꢅ
ꢂꢆ
158
185
ꢀ
ꢂꢃ
ꢀ
ꢂꢂ
ꢂꢁ
ꢁꢆ
152
ꢀꢁꢉ
ꢂꢅ
ꢀ
ꢀ
ꢂꢆ
42_clutch_mod_7
ꢀ
ꢂꢁ
ꢄꢂ
ꢂꢂ
ꢁ
ꢃ
ꢁꢉ
ꢀꢂꢄ
ꢁ
ꢇ ꢁꢅ
ꢁ
ꢁ
ꢀ
ꢂꢅ
ꢃꢃ
ꢁ
ꢂ
ꢀ
ꢂꢈ
ꢂꢄ
ꢃꢇ
ꢃꢀ
ꢀ
ꢂꢇ
ꢃꢆ
ꢇꢆꢄ
ꢃꢆ
ꢃꢂ
ꢀ
ꢇꢀ
ꢇꢀ
ꢇꢀ
ꢇꢃ
ꢇ
ꢇꢀ
ꢇꢂ
ꢀ
ꢂꢈ
ꢇꢁ
ꢇꢅ
ꢀ
ꢂꢇ
ꢇꢄ
ꢇꢈ
ꢇꢉ
ꢇ
ꢀ
ꢁ
ꢇꢆ
ꢀ
ꢂ
ꢀ
ꢄ
ꢃ
ꢉ
ꢀ
ꢄ
ꢀ
ꢂꢉ
ꢂ
ꢀ
ꢃ
ꢁ
ꢅ
ꢀꢀ
ꢀ
ꢄ
ꢇꢀ
ꢀꢁ?$?MANꢂTꢂPATH?STLT?ꢃꢄ
16
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
MOWER DECK
KEY
NO.
PART
NO.
KEY
NO.
PART
NO.
DESCRIPTION
DESCRIPTION
1
2
3
4
5
6
8
532 16 58-92 Mower Deck Assembly, 42"
872 14 05-06 Bolt
48
52
53
54
55
56
59
67
68
532 13 39-44 Washer, Hardened
532 13 98-88 Bolt, Shoulder 5/16-18 unc
532 18 49-07 Arm Assembly, Pad, Brake
532 17 85-15 Washer, Hardened
532 15 50-46 Arm, Idler
532 13 80-17 Bracket Asm Fr. Sway Bar 3/42
532 16 54-60 Bracket Asm Deck 42" Sway Bar
532 12 46-70 Retainer Spring
532 17 80-24 Bar Sway Deck
532 16 57-23 Spacer, Retainer
532 14 10-43 Guard TUV Idler
532 10 69-32 Knob Round
532 19 30-03 Bolt/Washer Asm. 7/16-20 unf
(The following Blades are available)
11
532 13 89-71 Blade Mower 42” Hi-Lift (for bag-
ging and discharging)
532 14 49-59 V-Belt, 42" Mower
142 532 19 57-84 Anchor Spring Brake Mower
143 532 15 71-09 Bracket Arm Idler 42"
144 532 15 86-34 Keeper Belt 42" Clutch Cable
145 532 16 58-88 Pulley Idler Flat
13
14
15
18
19
20
21
23
24
25
26
27
28
29
30
31
32
33
34
36
40
44
45
46
532 19 28-72 Shaft Asm. Mandrel
532 18 72-81 Housing, Mandrel
532 11 04-85 Bearing, Ball, Mandrel
872 14 05-05 Bolt, Carriage 5/16-18 x 5/8
532 13 28-27 Bolt, Shoulder
146 532 17 19-77 Bolt Carriage Idler
147 532 13 13-35 Spring Extension
532 15 97-70 Baffle, Vortex
873 68 05-00 Nut
532 17 75-63 Bracket, Deflector Mower 42"
532 10 53-04 Cap, Sleeve 80 x 112 Blk Mower
532 12 37-13 Spring, Torsion, Deflector 2 52
532 11 04-52 Nut, Push Phos & Oil
532 17 18-59 Shield, Deflector
148 532 16 90-22 Spring Return Idler
149 532 16 58-98 Retainer Spring Yellow
150 819 09 12-10 Washer 9/32 x 3/4 x 10 Ga.
152 532 16 96-76 Clutch Cable 42"
158 817 72 04-08 Screw Hex Thd Cut 1/4-20 x 1/2
159 872 14 06-14 Bolt Rdhd Sqn 3/8-16 unc x 1-3/4
184 819 13 14-10 Washer 13/32 x 7/8 x 10 Ga.
185 532 18 82-34 Head Asm Cable Clutch
208 817 67 06-08 Screw THDROL 3/8-16 x 1/2
819 11 10-16 Washer 11/32 x 5/8 x 16 Ga.
532 13 14-91 Rod, Hinge 42" 6 75 W/G
532 17 39-84 Screw Thdrol
- -
532 19 28-70 Mandrel Assembly (Includes hous-
ing, shaft assembly, and bear-
532 18 76-90 Washer, Spacer Mower Vented
532 15 35-35 Pulley, Mandrel
ing only - pulley/nut/washer and
532 40 02-34 Nut, Toplock
blade bolt/washers not included)
872 11 06-12 Bolt Carr SH 3/8-16 x 1-1/2 Gr.5
532 13 14-94 Pulley, Idler, Flat
- -
532 41 80-31 Replacement Mower, Complete
873 90 06-00 Nut Lock 3/8-16
532 14 00-88 Guard, Mandrel, LH
532 12 47-88 Retainer
NOTE: All component dimensions given in U.S. inches
inch = 25.4 mm
532 13 77-29 Screw, Thdrol 1/4-20 x 5/8 T
1
17
TRACTOR-- MODELNUMBERPXT175G42(96016002600),PRODUCTNO.9601600-26
MOWER LIFT
7
8
5
1
3
1
3
2
4
6
5
6
1
1
4
12
1
3
1
1
9
2
0
1
8
20
1
6
1
7
2
0
15
3
1
9
3
2
20
1
5
1
3
3
1
32
lift-rh.1piece_3
KEY PART
NO. NO.
KEY PART
NO. NO.
DESCRIPTION
DESCRIPTION
1
2
3
4
5
6
7
8
1
1
1
1
532 40 49-81 Plunger Asm Lift Lever
532 15 94-71 Shaft Asm Lift RH
532 10 57-67 Pin Groove
16
17
18
19
20
31
32
873 35 08-00 Nut Jam Hex 1/2-13 Unc
532 17 56-89 Trunnion
873 80 08-00 Nut Lockw/Wsh 1/2-13 Unc
532 13 98-68 Arm Suspension Rear
532 19 42-09 Pin Cotter 7/16 Bow Tie Lock
532 16 98-65 Bearing Pvt Lift
812 00 00-02 E Ring #5133-62
819 21 16-21 Washer 21/32 x 1 x 21 Ga
532 12 01-83 Bearing Nylon Blk 629 Id
532 10 94-13 Grip Handle
873 54 06-00 Nut Crownlock 3/8-24
532 12 45-26 Button Plunger Black
532 13 98-65 Link Lift LH Fixed Length
532 13 98-66 Link Lift RH Fixed Length
532 12 46-70 Retainer Spring
1
2
3
5
NOTE: All component dimensions given in U.S. inches
532 17 32-88 Link Front
1 inch = 25.4 mm.
18
SERVICE NOTES
19
LIMITED WARRANTY
The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in mate-
rials and workmanship. For a period of two (2) years from date of purchase by the original consumer purchaser, we will repair
or replace, at our option, without charge for parts or labor incurred in replacing parts, any part which we find to be defective
due to materials or workmanship. This Warranty is subject to the following limitations and exclusions.
1.
This warranty does not apply to the engine, transaxle/transmission components, battery (except as noted below) or com-
ponents parts thereof. Please refer to the applicable manufacturer's warranty on these items.
2.
Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchas-
er. Transportation charges for any parts submitted for replacement under this warranty must be paid by the purchaser un-
less such return is requested by the manufacturer.
3.
Battery Warranty: On products equipped with a Battery, we will replace, without charge to you, any battery which we find
to be defective in manufacture, during the first ninety (90) days of ownership. After ninety (90) days, we will exchange the
Battery, charging you 1/12 of the price of a new Battery for each full month from the date of the original sale. Battery must
be maintained in accordance with the instructions furnished.
4
.
.
The Warranty period for any products used for rental or commercial purposes is limited to 90 days from the date of origi-
nal purchase.
5
This Warranty applies only to products which have been properly assembled, adjusted, operated, and maintained in ac-
cordance with the instructions furnished. This Warranty does not apply to any product which has been subjected to altera-
tion, misuse, abuse, improper assembly or installation, delivery damage, or to normal wear of the product.
6
.
.
Exclusions: Excluded from this Warranty are belts, blades, blade adapters, normal wear, normal adjustments, standard
hardware and normal maintenance.
7
In the event you have a claim under this Warranty, you must return the product to an authorized service dealer.
Should you have any unanswered questions concerning this Warranty, please contact:
In Canada contact:
HOP
HOP
Outdoor Products Customer Service Dept.
5855 Terry Fox Way
9335 Harris Corners Parkway
Mississauga, Ontario
L5V 3E4
Charlotte, NC 28269 USA
giving the model number, serial number and date of purchase of your product and the name and address of the authorized
dealer from whom it was purchased.
THIS WARRANTY DOES NOT APPLY TO INCIDENTAL OR CONSEQUENTIAL DAMAGES AND ANY IMPLIED WARRAN-
TIES ARE LIMITED TO THE SAME TIME PERIODS STATED HEREIN FOR OUR EXPRESSED WARRANTIES. Some areas
do not allow the limitation of consequential damages or limitations of how long an implied Warranty may last, so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights
which vary from locale to locale.
This is a limited Warranty within the meaning of that term as defined in the Magnuson-Moss Act of 1975.
01.24.11 JA
Printed in the U.S.A.